Installation Problem in VAPS 5.3

Questions regarding the compilation of VASP on various platforms: hardware, compilers and libraries, etc.

Moderators: Global Moderator, Moderator

Post Reply
Message
Author
krparam
Newbie
Newbie
Posts: 2
Joined: Wed Jun 05, 2013 2:01 pm
License Nr.: 5-1606
Location: BITS Pilani

Installation Problem in VAPS 5.3

#1 Post by krparam » Thu Jun 06, 2013 9:40 pm

hiiii everyone!!

I m stuck in installation of VASP 5.3
Initially i installed Intel? Fortran Composer XE 2013 for Linux (install by using this link http://ubuntuforums.org/showthread.php?t=1082782) and FFTW 3.3.3 on my ubuntu.
Then i made my Makefile for vasp.5.lib as like this >>
SUFFIXES: .inc .f .F
#-----------------------------------------------------------------------
# Makefile for gf90 compiler
# This makefile has not been tested by the vasp crew.
# It is supplied as is.
#-----------------------------------------------------------------------

# C-preprocessor
CPP = gcc -E -P -C $*.F >$*.f
FC=ifort

CFLAGS = -O
FFLAGS = -O1
FREE = -ffree-form

DOBJ = preclib.o timing_.o derrf_.o dclock_.o diolib.o dlexlib.o drdatab.o


#-----------------------------------------------------------------------
# general rules
#-----------------------------------------------------------------------

libdmy.a: $(DOBJ) lapack_double.o linpack_double.o lapack_atlas.o
-rm libdmy.a
ar vq libdmy.a $(DOBJ)

# files which do not require autodouble
lapack_double.o: lapack_double.f
$(FC) $(FFLAGS) $(NOFREE) -c lapack_double.f
lapack_single.o: lapack_single.f
$(FC) $(FFLAGS) $(NOFREE) -c lapack_single.f
lapack_atlas.o: lapack_atlas.f
$(FC) $(FFLAGS) $(NOFREE) -c lapack_atlas.f
linpack_double.o: linpack_double.f
$(FC) $(FFLAGS) $(NOFREE) -c linpack_double.f
linpack_single.o: linpack_single.f
$(FC) $(FFLAGS) $(NOFREE) -c linpack_single.f

.c.o:
$(CC) $(CFLAGS) -c $*.c
.F.o:
$(CPP)
$(FC) $(FFLAGS) $(FREE) $(INCS) -c $*.f
.F.f:
$(CPP)
.f.o:
$(FC) $(FFLAGS) $(FREE) $(INCS) -c $*.f


and getting this error >>

gcc -E -P -C preclib.F >preclib.f
gfortran -O1 -ffree-form -c preclib.f
cc -O -c timing_.c
cc -O -c derrf_.c
cc -O -c dclock_.c
gcc -E -P -C diolib.F >diolib.f
gfortran -O1 -ffree-form -c diolib.f
gcc -E -P -C dlexlib.F >dlexlib.f
gfortran -O1 -ffree-form -c dlexlib.f
gcc -E -P -C drdatab.F >drdatab.f
gfortran -O1 -ffree-form -c drdatab.f
gfortran -O1 -c lapack_double.f
gfortran -O1 -c linpack_double.f
gfortran -O1 -c lapack_atlas.f
rm libdmy.a
rm: cannot remove `libdmy.a': No such file or directory
make: [libdmy.a] Error 1 (ignored)
ar vq libdmy.a preclib.o timing_.o derrf_.o dclock_.o diolib.o dlexlib.o drdatab.o
ar: creating libdmy.a
a - preclib.o
a - timing_.o
a - derrf_.o
a - dclock_.o
a - diolib.o
a - dlexlib.o
a - drdatab.o




And Makefile for vasp.5.3 is >>

.SUFFIXES: .inc .f .f90 .F
#-----------------------------------------------------------------------
# Makefile for gfortran (supplied by Juergen Furthmueller
# furth@ifto.physik.uni-jena.de)
########################################################################
#
# Disclaimer:
# presently the VASP team does not support gfortran
# The makefile is supplied as is.
# We can and will not assist in troubleshooting problems
# We strongly recommend installation and use of ifort 11.1
########################################################################
#-----------------------------------------------------------------------

# fortran compiler (I urgently recommend version >=4.6 *4.6 4.6 4.6*
# old gcc/gfortran have too many bugs and are expected to cause lot of trouble!!
# same compiler FC and compiler flags FFLAGS should be used for vasp.lib ...!
# it may happen that even a private LAPACK/BLAS needs to be compiled with the
# same compiler (depends a bit on the LAPACK/BLAS or ATLAS installation; for
# some LAPACK/BLAS one may need the -ff2c but maybe also not -- try out ...
#-----------------------------------------------------------------------
#
# BLAS must be installed on the machine
# there are several options:
# 1) very slow but works:
# retrieve the lapackage from ftp.netlib.org
# and compile the blas routines (BLAS/SRC directory)
# please use g77 or f77 for the compilation. When I tried to
# use pgf77 or pgf90 for BLAS, VASP hang up when calling
# ZHEEV (however this was with lapack 1.1 now I use lapack 2.0)
# 2) more desirable: get an optimized BLAS
#
# the two most reliable packages around are presently:
# 2a) Intels own optimised BLAS (PIII, P4, PD, PC2, Itanium)
# http://developer.intel.com/software/products/mkl/
# this is really excellent, if you use Intel CPU's
#
# 2b) probably fastest SSE2 (4 GFlops on P4, 2.53 GHz, 16 GFlops PD,
# around 30 GFlops on Quad core)
# Kazushige Goto's BLAS
# http://www.cs.utexas.edu/users/kgoto/signup_first.html
# http://www.tacc.utexas.edu/resources/software/
#
#-----------------------------------------------------------------------

# all CPP processed fortran files have the extension .f90
SUFFIX=.f90

#-----------------------------------------------------------------------
# fortran compiler and linker
#-----------------------------------------------------------------------
FC=/usr/local/gcc-4.6/bin/gfortran46 -ffree-form -ffree-line-length-0 -ff2c -fno-second-underscore
# fortran linker
FCL=$(FC)


#-----------------------------------------------------------------------
# whereis CPP ?? (I need CPP, can't use gcc with proper options)
# that's the location of gcc for SUSE 5.3
#
# CPP_ = /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C
#
# that's probably the right line for some Red Hat distribution:
#
# CPP_ = /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C
#
# SUSE X.X, maybe some Red Hat distributions:

CPP_ = ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX)

# this release should be fpp clean
# we now recommend fpp as preprocessor
# if this fails go back to cpp
CPP_=fpp -f_com=no -free -w0 $*.F $*$(SUFFIX)

#-----------------------------------------------------------------------
# possible options for CPP:
# NGXhalf charge density reduced in X direction
# wNGXhalf gamma point only reduced in X direction
# avoidalloc avoid ALLOCATE if possible
# PGF90 work around some for some PGF90 / IFC bugs
# CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn MD package of Tomas Bucko
#-----------------------------------------------------------------------

CPP = $(CPP_) -DHOST=\"gfortran\" \
-DCACHE_SIZE=4096 -DMINLOOP=1 -DNGXhalf \

#-----------------------------------------------------------------------
# general fortran flags (there must a trailing blank on this line)
# byterecl is strictly required for ifc, since otherwise
# the WAVECAR file becomes huge
#-----------------------------------------------------------------------

FFLAGS = -FR -lowercase -assume byterecl

#-----------------------------------------------------------------------
# optimization
# we have tested whether higher optimisation improves performance
# -axK SSE1 optimization, but also generate code executable on all mach.
# xK improves performance somewhat on XP, and a is required in order
# to run the code on older Athlons as well
# -xW SSE2 optimization
# -axW SSE2 optimization, but also generate code executable on all mach.
# -tpp6 P3 optimization
# -tpp7 P4 optimization
#-----------------------------------------------------------------------

# ifc.9.1, ifc.10.1 recommended
OFLAG=-O3

OFLAG_HIGH = $(OFLAG)
OBJ_HIGH =
OBJ_NOOPT =
DEBUG = -O0
INLINE = $(OFLAG)

#-----------------------------------------------------------------------
# the following lines specify the position of BLAS and LAPACK
# VASP works fastest with the libgoto library
# so that's what we recommend
#-----------------------------------------------------------------------

# mkl.10.0
# set -DRPROMU_DGEMV -DRACCMU_DGEMV in the CPP lines
#BLAS=-L/opt/intel/mkl100/lib/em64t -lmkl -lpthread

# even faster for VASP Kazushige Goto's BLAS
# http://www.cs.utexas.edu/users/kgoto/signup_first.html
# parallel goto version requires sometimes -libverbs
BLAS= /opt/libs/libgoto/libgoto.so

# LAPACK, simplest use vasp.5.lib/lapack_double
LAPACK= ../vasp.5.lib/lapack_double.o

# use the mkl Intel lapack
#LAPACK= -lmkl_lapack

#-----------------------------------------------------------------------

LIB = -fall-intrinsics \
-L../vasp.5.lib -ldmy \
../vasp.5.lib/linpack_double.o $(LAPACK) \
$(BLAS)

# options for linking, nothing is required (usually)
LINK =

#-----------------------------------------------------------------------
# fft libraries:
# VASP.5.2 can use fftw.3.1.X (http://www.fftw.org)
# since this version is faster on P4 machines, we recommend to use it
#-----------------------------------------------------------------------

FFT3D = fft3dfurth.o fft3dlib.o

# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D = fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a


#=======================================================================
# MPI section, uncomment the following lines until
# general rules and compile lines
# presently we recommend OPENMPI, since it seems to offer better
# performance than lam or mpich
#
# !!! Please do not send me any queries on how to install MPI, I will
# certainly not answer them !!!!
#=======================================================================
#-----------------------------------------------------------------------
# fortran linker for mpi
#-----------------------------------------------------------------------

#FC=mpif77
#FCL=$(FC)

#-----------------------------------------------------------------------
# additional options for CPP in parallel version (see also above):
# NGZhalf charge density reduced in Z direction
# wNGZhalf gamma point only reduced in Z direction
# scaLAPACK use scaLAPACK (usually slower on 100 Mbit Net)
# avoidalloc avoid ALLOCATE if possible
# PGF90 work around some for some PGF90 / IFC bugs
# CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn MD package of Tomas Bucko
#-----------------------------------------------------------------------

#-----------------------------------------------------------------------

#CPP = $(CPP_) -DHOST=\"gfortran\" \
# -DCACHE_SIZE=4096 -DMINLOOP=1 -DNGZhalf \
# -DMPI_BLOCK=8000

#-----------------------------------------------------------------------
# location of SCALAPACK
# if you do not use SCALAPACK simply leave that section commented out
#-----------------------------------------------------------------------

#BLACS=$(HOME)/archives/SCALAPACK/BLACS/
#SCA_=$(HOME)/archives/SCALAPACK/SCALAPACK

#SCA= $(SCA_)/libscalapack.a \
# $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a $(BLACS)/LIB/blacs_MPI-LINUX-0.a $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a

SCA=

#-----------------------------------------------------------------------
# libraries for mpi
#-----------------------------------------------------------------------

#LIB = -fall-intrinsics \
# -L../vasp.5.lib -ldmy \
# ../vasp.5.lib/linpack_double.o $(LAPACK) \
# $(SCA) $(BLAS)

# FFT: fftmpi.o with fft3dlib of Juergen Furthmueller
#FFT3D = fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o

# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a

#-----------------------------------------------------------------------
# general rules and compile lines
#-----------------------------------------------------------------------
BASIC= symmetry.o symlib.o lattlib.o random.o


SOURCE= base.o mpi.o smart_allocate.o xml.o \
constant.o jacobi.o main_mpi.o scala.o \
asa.o lattice.o poscar.o ini.o mgrid.o xclib.o vdw_nl.o xclib_grad.o \
radial.o pseudo.o gridq.o ebs.o \
mkpoints.o wave.o wave_mpi.o wave_high.o \
$(BASIC) nonl.o nonlr.o nonl_high.o dfast.o choleski2.o \
mix.o hamil.o xcgrad.o xcspin.o potex1.o potex2.o \
constrmag.o cl_shift.o relativistic.o LDApU.o \
paw_base.o metagga.o egrad.o pawsym.o pawfock.o pawlhf.o rhfatm.o paw.o \
mkpoints_full.o charge.o Lebedev-Laikov.o stockholder.o dipol.o pot.o \
dos.o elf.o tet.o tetweight.o hamil_rot.o \
steep.o chain.o dyna.o sphpro.o us.o core_rel.o \
aedens.o wavpre.o wavpre_noio.o broyden.o \
dynbr.o rmm-diis.o reader.o writer.o tutor.o xml_writer.o \
brent.o stufak.o fileio.o opergrid.o stepver.o \
chgloc.o fast_aug.o fock.o mkpoints_change.o sym_grad.o \
mymath.o internals.o dynconstr.o dimer_heyden.o dvvtrajectory.o vdwforcefield.o \
hamil_high.o nmr.o pead.o mlwf.o subrot.o subrot_scf.o \
force.o pwlhf.o gw_model.o optreal.o davidson.o david_inner.o \
electron.o rot.o electron_all.o shm.o pardens.o paircorrection.o \
optics.o constr_cell_relax.o stm.o finite_diff.o elpol.o \
hamil_lr.o rmm-diis_lr.o subrot_cluster.o subrot_lr.o \
lr_helper.o hamil_lrf.o elinear_response.o ilinear_response.o \
linear_optics.o linear_response.o \
setlocalpp.o wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o \
ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o local_field.o \
ump2.o bse_te.o bse.o acfdt.o chi.o sydmat.o dmft.o \
rmm-diis_mlr.o linear_response_NMR.o

vasp: $(SOURCE) $(FFT3D) $(INC) main.o
rm -f vasp
$(FCL) -o vasp main.o $(SOURCE) $(FFT3D) $(LIB) $(LINK)
makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC)
$(FCL) -o makeparam $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB)
zgemmtest: zgemmtest.o base.o random.o $(INC)
$(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB)
dgemmtest: dgemmtest.o base.o random.o $(INC)
$(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB)
ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC)
$(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o base.o $(FFT3D) $(LIB)
kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC)
$(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB)

clean:
-rm -f *.g *.f *.o *.L *.mod ; touch *.F

main.o: main$(SUFFIX)
$(FC) $(FFLAGS)$(DEBUG) $(INCS) -c main$(SUFFIX)
xcgrad.o: xcgrad$(SUFFIX)
$(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcgrad$(SUFFIX)
xcspin.o: xcspin$(SUFFIX)
$(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcspin$(SUFFIX)

makeparam.o: makeparam$(SUFFIX)
$(FC) $(FFLAGS)$(DEBUG) $(INCS) -c makeparam$(SUFFIX)

makeparam$(SUFFIX): makeparam.F main.F
#
# MIND: I do not have a full dependency list for the include
# and MODULES: here are only the minimal basic dependencies
# if one structure is changed then touch_dep must be called
# with the corresponding name of the structure
#
base.o: base.inc base.F
mgrid.o: mgrid.inc mgrid.F
constant.o: constant.inc constant.F
lattice.o: lattice.inc lattice.F
setex.o: setexm.inc setex.F
pseudo.o: pseudo.inc pseudo.F
mkpoints.o: mkpoints.inc mkpoints.F
wave.o: wave.F
nonl.o: nonl.inc nonl.F
nonlr.o: nonlr.inc nonlr.F

$(OBJ_HIGH):
$(CPP)
$(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX)
$(OBJ_NOOPT):
$(CPP)
$(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX)

fft3dlib_f77.o: fft3dlib_f77.F
$(CPP)
$(F77) $(FFLAGS_F77) -c $*$(SUFFIX)

.F.o:
$(CPP)
$(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)
.F$(SUFFIX):
$(CPP)
$(SUFFIX).o:
$(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)

# special rules
#-----------------------------------------------------------------------


and getting this error >>

fpp -f_com=no -free -w0 base.F base.f90 -DHOST=\"gfortran\" -DCACHE_SIZE=4096 -DMINLOOP=1 -DNGXhalf
make: fpp: Command not found
make: *** [base.o] Error 127


Could throw me some suggestion, i m totally stuck!!
Last edited by krparam on Thu Jun 06, 2013 9:40 pm, edited 1 time in total.

beck
Newbie
Newbie
Posts: 19
Joined: Tue Jun 14, 2005 3:22 pm

Installation Problem in VAPS 5.3

#2 Post by beck » Fri Jun 07, 2013 6:28 am

Dear krparam,

the first error can be ignored (read the output...), and the second one is addressed in the Makefile:
# this release should be fpp clean
# we now recommend fpp as preprocessor
# if this fails go back to cpp
CPP_=fpp -f_com=no -free -w0 $*.F $*$(SUFFIX)

...so set fpp back to cpp and try again.
Last edited by beck on Fri Jun 07, 2013 6:28 am, edited 1 time in total.

krparam
Newbie
Newbie
Posts: 2
Joined: Wed Jun 05, 2013 2:01 pm
License Nr.: 5-1606
Location: BITS Pilani

Installation Problem in VAPS 5.3

#3 Post by krparam » Fri Jun 07, 2013 8:37 am

thanks beck,

finally it run by using ifort, i couldn't locate ifort so i use this command

source /opt/intel/composer_xe_2013/bin/compilervars.sh intel64

but at the end i got an error again >>

-----------------------------^
main.F(1191): remark #8291: Recommended relationship between field width 'W' and the number of fractional digits 'D' in this edit descriptor is 'W>=D+7'.
& ' EDIFF = ',E7.1,' stopping-criterion for ELM'/ &
-----------------------------^
rm -f vasp
ifort -o vasp main.o base.o mpi.o smart_allocate.o xml.o constant.o jacobi.o main_mpi.o scala.o asa.o lattice.o poscar.o ini.o mgrid.o xclib.o vdw_nl.o xclib_grad.o radial.o pseudo.o gridq.o ebs.o mkpoints.o wave.o wave_mpi.o wave_high.o spinsym.o symmetry.o symlib.o lattlib.o random.o nonl.o nonlr.o nonl_high.o dfast.o choleski2.o mix.o hamil.o xcgrad.o xcspin.o potex1.o potex2.o constrmag.o cl_shift.o relativistic.o LDApU.o paw_base.o metagga.o egrad.o pawsym.o pawfock.o pawlhf.o rhfatm.o hyperfine.o paw.o mkpoints_full.o charge.o Lebedev-Laikov.o stockholder.o dipol.o pot.o dos.o elf.o tet.o tetweight.o hamil_rot.o chain.o dyna.o k-proj.o sphpro.o us.o core_rel.o aedens.o wavpre.o wavpre_noio.o broyden.o dynbr.o hamil_high.o rmm-diis.o reader.o writer.o tutor.o xml_writer.o brent.o stufak.o fileio.o opergrid.o stepver.o chgloc.o fast_aug.o fock_multipole.o fock.o mkpoints_change.o sym_grad.o mymath.o internals.o npt_dynamics.o dynconstr.o dimer_heyden.o dvvtrajectory.o vdwforcefield.o nmr.o pead.o subrot.o subrot_scf.o force.o pwlhf.o gw_model.o optreal.o steep.o davidson.o david_inner.o electron.o rot.o electron_all.o shm.o pardens.o paircorrection.o optics.o constr_cell_relax.o stm.o finite_diff.o elpol.o hamil_lr.o rmm-diis_lr.o subrot_cluster.o subrot_lr.o lr_helper.o hamil_lrf.o elinear_response.o ilinear_response.o linear_optics.o setlocalpp.o wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o mlwf.o ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o local_field.o ump2.o ump2kpar.o fcidump.o ump2no.o bse_te.o bse.o acfdt.o chi.o sydmat.o dmft.o rmm-diis_mlr.o linear_response_NMR.o wannier_interpol.o linear_response.o fft3dfurth.o fft3dlib.o -L../vasp.5.lib -ldmy ../vasp.5.lib/linpack_double.o /opt/intel/composer_xe_2013.4.183/mkl/lib/intel64/libmkl_intel_lp64.a -lguide -mkl
ifort: error #10236: File not found: '../vasp.5.lib/linpack_double.o'
make: *** [vasp] Error 1
Last edited by krparam on Fri Jun 07, 2013 8:37 am, edited 1 time in total.

beck
Newbie
Newbie
Posts: 19
Joined: Tue Jun 14, 2005 3:22 pm

Installation Problem in VAPS 5.3

#4 Post by beck » Sat Jun 08, 2013 7:26 am

did you compile in the folder vasp.5.lib? Do it first.
Last edited by beck on Sat Jun 08, 2013 7:26 am, edited 1 time in total.

Post Reply