Band gap renormalization in diamond using one-shot method: Difference between revisions
| Line 226: | Line 226: | ||
where <math> E_{\mathrm{EPC}}</math> and <math> E_{\mathrm{no}} </math> are the band gaps with and without EPC, respectively. | where <math> E_{\mathrm{EPC}}</math> and <math> E_{\mathrm{no}} </math> are the band gaps with and without EPC, respectively. | ||
Since the 4x4x4 cell of cubic diamond as 3 degenerate bands at the valence band maximum and 6 degenerate bands at the conduction band minimum, they are averaged in the calculation of the band gap. This is necessary since the convergence with respect to cell size is drastically improved this way. Also all perturbation theory calculations in literature evaluate the band gap the same way. | Since the 4x4x4 cell of cubic diamond as 3 degenerate bands at the valence band maximum and 6 degenerate bands at the conduction band minimum, they are averaged in the calculation of the band gap. This is necessary since the convergence with respect to cell size is drastically improved this way. Also all perturbation theory calculations in literature evaluate the band gap the same way, which ensures compatibility of the different calculational methods. | ||
The band gaps are extracted from the previously saved files ''OUTCAR.init'' and ''OUTCAR.T=0.'' using the following script: | The band gaps are extracted from the previously saved files ''OUTCAR.init'' and ''OUTCAR.T=0.'' using the following script: | ||
Revision as of 13:09, 20 August 2020
Task
Calculating the zero-point renormalization of the band gap in cubic diamond carbon.
Input
POSCAR
- Primitive cell (POSCAR.prim):
C_2_fcc
1.00000000000000
0.0000000000000000 1.783493 1.783493
1.783493 0.0000000000000000 1.783493
1.783493 1.783493 0.0000000000000000
C
2
Direct
0.0000000000000000 0.0000000000000000 0.0000000000000000
0.7500000000000000 0.7500000000000000 0.7500000000000000
- 4x4x4 super cell used in this calculation (POSCAR.4x4x4):
C_128_fcc
1.00000000000000
0.00000000 7.13397200 7.13397200
7.13397200 0.00000000 7.13397200
7.13397200 7.13397200 0.00000000
C
128
Direct
0.00000000 0.00000000 0.00000000
0.25000000 0.00000000 0.00000000
0.50000000 0.00000000 0.00000000
0.75000000 0.00000000 0.00000000
0.00000000 0.25000000 0.00000000
0.25000000 0.25000000 0.00000000
0.50000000 0.25000000 0.00000000
0.75000000 0.25000000 0.00000000
0.00000000 0.50000000 0.00000000
0.25000000 0.50000000 0.00000000
0.50000000 0.50000000 0.00000000
0.75000000 0.50000000 0.00000000
0.00000000 0.75000000 0.00000000
0.25000000 0.75000000 0.00000000
0.50000000 0.75000000 0.00000000
0.75000000 0.75000000 0.00000000
0.00000000 0.00000000 0.25000000
0.25000000 0.00000000 0.25000000
0.50000000 0.00000000 0.25000000
0.75000000 0.00000000 0.25000000
0.00000000 0.25000000 0.25000000
0.25000000 0.25000000 0.25000000
0.50000000 0.25000000 0.25000000
0.75000000 0.25000000 0.25000000
0.00000000 0.50000000 0.25000000
0.25000000 0.50000000 0.25000000
0.50000000 0.50000000 0.25000000
0.75000000 0.50000000 0.25000000
0.00000000 0.75000000 0.25000000
0.25000000 0.75000000 0.25000000
0.50000000 0.75000000 0.25000000
0.75000000 0.75000000 0.25000000
0.00000000 0.00000000 0.50000000
0.25000000 0.00000000 0.50000000
0.50000000 0.00000000 0.50000000
0.75000000 0.00000000 0.50000000
0.00000000 0.25000000 0.50000000
0.25000000 0.25000000 0.50000000
0.50000000 0.25000000 0.50000000
0.75000000 0.25000000 0.50000000
0.00000000 0.50000000 0.50000000
0.25000000 0.50000000 0.50000000
0.50000000 0.50000000 0.50000000
0.75000000 0.50000000 0.50000000
0.00000000 0.75000000 0.50000000
0.25000000 0.75000000 0.50000000
0.50000000 0.75000000 0.50000000
0.75000000 0.75000000 0.50000000
0.00000000 0.00000000 0.75000000
0.25000000 0.00000000 0.75000000
0.50000000 0.00000000 0.75000000
0.75000000 0.00000000 0.75000000
0.00000000 0.25000000 0.75000000
0.25000000 0.25000000 0.75000000
0.50000000 0.25000000 0.75000000
0.75000000 0.25000000 0.75000000
0.00000000 0.50000000 0.75000000
0.25000000 0.50000000 0.75000000
0.50000000 0.50000000 0.75000000
0.75000000 0.50000000 0.75000000
0.00000000 0.75000000 0.75000000
0.25000000 0.75000000 0.75000000
0.50000000 0.75000000 0.75000000
0.75000000 0.75000000 0.75000000
0.18750000 0.18750000 0.18750000
0.43750000 0.18750000 0.18750000
0.68750000 0.18750000 0.18750000
0.93750000 0.18750000 0.18750000
0.18750000 0.43750000 0.18750000
0.43750000 0.43750000 0.18750000
0.68750000 0.43750000 0.18750000
0.93750000 0.43750000 0.18750000
0.18750000 0.68750000 0.18750000
0.43750000 0.68750000 0.18750000
0.68750000 0.68750000 0.18750000
0.93750000 0.68750000 0.18750000
0.18750000 0.93750000 0.18750000
0.43750000 0.93750000 0.18750000
0.68750000 0.93750000 0.18750000
0.93750000 0.93750000 0.18750000
0.18750000 0.18750000 0.43750000
0.43750000 0.18750000 0.43750000
0.68750000 0.18750000 0.43750000
0.93750000 0.18750000 0.43750000
0.18750000 0.43750000 0.43750000
0.43750000 0.43750000 0.43750000
0.68750000 0.43750000 0.43750000
0.93750000 0.43750000 0.43750000
0.18750000 0.68750000 0.43750000
0.43750000 0.68750000 0.43750000
0.68750000 0.68750000 0.43750000
0.93750000 0.68750000 0.43750000
0.18750000 0.93750000 0.43750000
0.43750000 0.93750000 0.43750000
0.68750000 0.93750000 0.43750000
0.93750000 0.93750000 0.43750000
0.18750000 0.18750000 0.68750000
0.43750000 0.18750000 0.68750000
0.68750000 0.18750000 0.68750000
0.93750000 0.18750000 0.68750000
0.18750000 0.43750000 0.68750000
0.43750000 0.43750000 0.68750000
0.68750000 0.43750000 0.68750000
0.93750000 0.43750000 0.68750000
0.18750000 0.68750000 0.68750000
0.43750000 0.68750000 0.68750000
0.68750000 0.68750000 0.68750000
0.93750000 0.68750000 0.68750000
0.18750000 0.93750000 0.68750000
0.43750000 0.93750000 0.68750000
0.68750000 0.93750000 0.68750000
0.93750000 0.93750000 0.68750000
0.18750000 0.18750000 0.93750000
0.43750000 0.18750000 0.93750000
0.68750000 0.18750000 0.93750000
0.93750000 0.18750000 0.93750000
0.18750000 0.43750000 0.93750000
0.43750000 0.43750000 0.93750000
0.68750000 0.43750000 0.93750000
0.93750000 0.43750000 0.93750000
0.18750000 0.68750000 0.93750000
0.43750000 0.68750000 0.93750000
0.68750000 0.68750000 0.93750000
0.93750000 0.68750000 0.93750000
0.18750000 0.93750000 0.93750000
0.43750000 0.93750000 0.93750000
0.68750000 0.93750000 0.93750000
0.93750000 0.93750000 0.93750000
KPOINTS
K-Points 0 Gamma 1 1 1 0 0 0
INCAR
general: System = cd-C PREC = Accurate ALGO = FAST ISMEAR = 0 SIGMA = 0.1; IBRION = 6 PHON_LMC = .TRUE. PHON_NSTRUCT = 0 PHON_NTLIST = 1 PHON_TLIST = 0.0
- The tags with "PHON_" control the electron-phonon couplings (EPC). PHON_LMC enables electron-phonon coupling in the calculations using Monte Carlo sampling. By selecting PHON_NSTRUCT=0 a one-shot configuration (ZG configuration) is obtained. The tag PHON_NTLIST selects the number of temperatures for which the structure with the one shot calculation is obtained. This requires also the list of temperatures given by PHON_TLIST which have exact PHON_NTLIST number of elements.
- IBRION=6 is selected to obtain the eigenvectors and eigenvalues of the dynamical matrix at the Gamma point.
Calculation
This example will use a one-shot method, where only a single structure comprising the EPC is required for a given temperature.
The calculation consists of two steps:
- Obtain new "distorted" POSCAR file which contains the EPC. This calculation also contains the band gap of the original structure.
- Execute simple DFT calculation for the EPC structure to obtain the band gap.
- Extract ZPR as the difference between the band gaps from the two calculations.
Step 1 obtain structure containing EPC
To run the calculation POSCAR.4x4x4 needs to be copied to POSCAR and INCAR.init to INCAR.
Execute VASP.
Copy the OUTCAR file to OUTCAR.init. It will be later used for the band gap of the "undistorted" structure.
The new POSCAR file containing the configurations according to the electron-phonon couplings is given as POSCAR.T=0..
Step 2 calculate electronic levels of structure containing EPC
Copy the file POSCAR.T=0. to POSCAR.
Delete (or comment out with #) all the lines in the INCAR file related to EPC so that it looks like the following:
System = cd-C PREC = Accurate ALGO = FAST ISMEAR = 0 SIGMA = 0.1;
Execute VASP.
Copy OUTCAR to OUTCAR.T=0..
Step 3 extract ZPR
We extract the band gap renormalization as
where and are the band gaps with and without EPC, respectively.
Since the 4x4x4 cell of cubic diamond as 3 degenerate bands at the valence band maximum and 6 degenerate bands at the conduction band minimum, they are averaged in the calculation of the band gap. This is necessary since the convergence with respect to cell size is drastically improved this way. Also all perturbation theory calculations in literature evaluate the band gap the same way, which ensures compatibility of the different calculational methods. The band gaps are extracted from the previously saved files OUTCAR.init and OUTCAR.T=0. using the following script:
- REDIRECT Extract zpr
To use the script please type:
bash extract_zpr_cd_carbon.sh
The output of the script should look like the following:
The band gap (in eV) without zero-point vibrations is: 4.4049 The band gap (in eV) including zero-point vibrations is: 4.05102 The zero-point renormalization of the band gap (in eV) is: -0.353883
Step 4 better accuracy
The accuracy of the band gap renormalization depends dominantly on the size of the super cell, so this is the quantity that has to be usually converged in this type of calculation.
This example contains a POSCAR file for a 5x5x5 cell (POSCAR.5x5x5) in the directory SUPERCELL5x5x5. After repeating all above steps with this POSCAR file the following results should be obtained:
The band gap (in eV) without zero-point vibrations is: 4.1421 The band gap (in eV) including zero-point vibrations is: 3.83717 The zero-point renormalization of the band gap (in eV) is: -0.304933
The interested user can try to further increase the cell size, by making a super cell from the primitive cell (POSCAR.prim) provided by this tutorial (how to build a super cell is for example covered here.