Graphite interlayer distance: Difference between revisions

From VASP Wiki
Line 53: Line 53:
== Running this example ==
== Running this example ==


To run this example, execute the <code>run.sh</code> bash-script:
<pre>
#
# To run VASP this script calls $vasp_std
# (or posibly $vasp_gam and/or $vasp_ncl).
# These variables can be defined by sourcing vaspcmd
. vaspcmd 2> /dev/null


Optimal length of the lattice vector c normal to
#
the stacking direction is determined in a series
# When vaspcmd is not available and $vasp_std,
of single point calculations with varied value
# $vasp_gam, and/or $vasp_ncl are not set as environment
of c (all other degrees of freedom are fixed at
# variables, you can specify them here
their experimental values).
[ -z "`echo $vasp_std`" ] && vasp_std="mpirun -np 8 /path-to-your-vasp/vasp_std"
[ -z "`echo $vasp_gam`" ] && vasp_gam="mpirun -np 8 /path-to-your-vasp/vasp_gam"
[ -z "`echo $vasp_ncl`" ] && vasp_ncl="mpirun -np 8 /path-to-your-vasp/vasp_ncl"


The computed c vs. energy dependence
#
is written in the file results.dat and can be
# The real work starts here
visualized e.g. using xmgrace. The optimal
#
value can be obtained using the attached
utility (python with numpy or Numeric is needed):


<tt>./utilities/fit.py results.dat</tt>
rm results.dat
 
for d in 6.5 6.6 6.65 6.7 6.75 6.8 6.9 7.0
do
  cat>POSCAR<<!
graphite
1.0
1.22800000 -2.12695839  0.00000000
1.22800000  2.12695839  0.00000000
0.00000000  0.00000000  $d
4
direct
  0.00000000  0.00000000  0.25000000
  0.00000000  0.00000000  0.75000000
  0.33333333  0.66666667  0.25000000
  0.66666667  0.33333333  0.75000000
!
  $vasp_std
  cp OUTCAR OUTCAR.$d
  energy=$(grep "free  ene" OUTCAR.$d|awk '{print $5}')
  echo $d $energy >> results.dat
done
</pre>
 
The optimal length of the lattice vector ''c'' normal to the stacking direction is determined in a series of single point calculations with varied value of ''c'' (all other degrees of freedom are fixed at their experimental values).
 
The computed ''c'' vs. energy dependence is written in the file <code>results.dat</code> and can be visualized e.g. using ''xmgrace''.
The optimal value can be obtained using the attached utility (python with numpy or Numeric is needed):
 
./utilities/fit.py results.dat


  200 iterations performed
  200 iterations performed
Line 75: Line 111:
         d0(A):  6.65603352689
         d0(A):  6.65603352689


The computed value of 6.66 A agrees well with  
The computed value of 6.66 A agrees well with experiment (6.71 A).
experiment (6.71 A).


== Download ==
== Download ==

Revision as of 21:22, 24 June 2019

Task

In this example you will determine the interlayer distance of graphite in the stacking direction using the method of Tchatchenko and Scheffler to account for van der Waals interactions.

Semilocal DFT at the GGA level underestimates long-range dispersion interactions. This problem causes a bad overestimation of graphite lattice in the stacking direction: 8.84 Å (PBE) vs. 6.71 Å (exp).

In this example, the dispersion correction method of Tchatchenko and Scheffler is used to cope with this problem.

Input

POSCAR

graphite
1.0
1.22800000 -2.12695839  0.00000000
1.22800000  2.12695839  0.00000000
0.00000000  0.00000000  7.0
4
direct
   0.00000000  0.00000000  0.25000000
   0.00000000  0.00000000  0.75000000
   0.33333333  0.66666667  0.25000000
   0.66666667  0.33333333  0.75000000

INCAR

IVDW = 20           
LVDW_EWALD =.TRUE. 
NSW = 1 
IBRION = 2
ISIF = 4
PREC = Accurate
EDIFFG = 1e-5
LWAVE = .FALSE.
LCHARG = .FALSE.
ISMEAR = -5
SIGMA = 0.01
EDIFF = 1e-6
ALGO = Fast
NPAR = 2

KPOINTS

Monkhorst Pack
0
gamma
16 16 8
0 0 0

Running this example

To run this example, execute the run.sh bash-script:

#
# To run VASP this script calls $vasp_std
# (or posibly $vasp_gam and/or $vasp_ncl).
# These variables can be defined by sourcing vaspcmd
. vaspcmd 2> /dev/null

#
# When vaspcmd is not available and $vasp_std,
# $vasp_gam, and/or $vasp_ncl are not set as environment
# variables, you can specify them here
[ -z "`echo $vasp_std`" ] && vasp_std="mpirun -np 8 /path-to-your-vasp/vasp_std"
[ -z "`echo $vasp_gam`" ] && vasp_gam="mpirun -np 8 /path-to-your-vasp/vasp_gam"
[ -z "`echo $vasp_ncl`" ] && vasp_ncl="mpirun -np 8 /path-to-your-vasp/vasp_ncl"

#
# The real work starts here
#

rm results.dat

for d in 6.5 6.6 6.65 6.7 6.75 6.8 6.9 7.0
do
  cat>POSCAR<<!
graphite
1.0
1.22800000 -2.12695839  0.00000000
1.22800000  2.12695839  0.00000000
0.00000000  0.00000000  $d
4
direct
   0.00000000  0.00000000  0.25000000
   0.00000000  0.00000000  0.75000000
   0.33333333  0.66666667  0.25000000
   0.66666667  0.33333333  0.75000000
!
  $vasp_std
  cp OUTCAR OUTCAR.$d
  energy=$(grep "free  ene" OUTCAR.$d|awk '{print $5}')
  echo $d $energy >> results.dat 
done

The optimal length of the lattice vector c normal to the stacking direction is determined in a series of single point calculations with varied value of c (all other degrees of freedom are fixed at their experimental values).

The computed c vs. energy dependence is written in the file results.dat and can be visualized e.g. using xmgrace. The optimal value can be obtained using the attached utility (python with numpy or Numeric is needed):

./utilities/fit.py results.dat
200 iterations performed
Ch-square: 4.30305519481e-09
---------

       E0(eV):         -37.433456779
       d0(A):  6.65603352689

The computed value of 6.66 A agrees well with experiment (6.71 A).

Download

graphiteDistance_ts.tgz

Back to the main page.