Requests for technical support from the VASP group should be posted in the VASP-forum.

Machine learning force field: Theory

From Vaspwiki
Jump to navigationJump to search

Here we present the theory for on-the-fly machine learning force fields, which will be only available from VASP6.0 or higher. The theory will be presented in a very condensed manner and for a more detailed description of the methods we refer the readers to Refs. [1] and [2].


Molecular dynamics is one of the most important methods for the determination of dynamic properties. The quality of the molecular dynamics simulation depends very strongly on the accuracy of the calculational method, but higher accuracy usually comes at the cost of increased computational demand. A very accurate method is ab initio molecular dynamics, where the interactions of atoms and electrons are calculated fully quantum mechanically from ab initio calculations (such as e.g. DFT). Unfortunately this method is very often limited too small simulation cells and simulation times. One way to hugely speed up these calculations is by using force fields, which are parametrizations of the potential energy. These parametrizations can range frome very simple functions with only empirical parameters, to very complex functions parametrized using thousands of ab initio calculations. Usually making accurate force fields manually is a very time consuming task that needs tremendous expertise and know how.

One way to greatly reduce computational cost and required human intervention is by machine learning. Here, in the prediction of the target property the method automatically interpolates between known training systems which were previously calculated by ab initio. This way the generation of force fields is already significantly simplified compared to classical force field which need manual (or even empirical) adjustment of the parameters. Nevertheless there is still the problem how to choose the proper (minimal) training data. One very efficient and automic way to solve that is to adapt on-the-fly learning. Here an MD calculation is used for the learning. During the run of the MD calculation ab initio data is picked out and added to the training data. From the existing data a force field is continuously built up. At each step it is judged whether to make an ab initio calculation and possibly add the data to the force field or to use the force field for that step and actually skip learning for that step. Hence the name "on the fly" learning. The crucial point here is the probability model for the estimation of errors. This model not force field is build up from newly sampled data. Hence the name on the fly. In this way the more accurate the force field gets the less sampling is needed and the more expensive ab initio steps are skipped. This way not only the convergence of the force field can be controlled but also a very wide spread scan through phase space for the training structures can be performed. The crucial point for an on-the-fly machine learning which will be explained with the rest of the methodology in the following subsections, is to be able to predict errors of the force field on a newly sampled structure without the necessity to perform an ab initio calculation on that structure.


Fig. 1: On-the-fly machine learning force field generation scheme.

To obtain the machine-learning force field several structure datasets are required. A structure dataset defines the Bravais lattice and the atomic positions of the system and contains the total energy, the forces and the stress tensor calculated by first principles. Given these structure datasets, the machine identifies local configurations around an atom to learn what force field is appropriate. The local configuration measures the radial and angular distribution of neighboring atoms around this given site and is captured in so called descriptors.

The on-the-fly force field generation scheme is given by the following steps (a flowchart of the algorithm is shown in Fig. 1):

  1. The machine predicts the energy, the forces and the stress tensor and their uncertainties for a given structure using the existing force field.
  2. The machine decides whether to perform a first principles calculation (proceed with step 3); otherwise we skip to step 5.
  3. Performing the first principles calculation, we obtain a new structure dataset which may improve the force field.
  4. If the number of newly collected structures reaches a certain threshold or if the predicted uncertainty becomes too large, the machine learns an improved force field by including the new structure datasets and local configurations.
  5. Atomic positions and velocities are updated by using the force field (if accurate enough) or the first principles calculation.
  6. If the desired total number of ionic steps (NSW) is reached we are done; otherwise proceed with step 1.


The potential energy of a structure with atoms is approximated as

The local energies are functionals of the probability density to find another atom at the position around the atom within a cut-off radius defined as

Here is a cut-off function acting outside of . In the Smooth Overlap of Atomic Positions[3] (SOAP) method the delta function is approximated as

Fig. 2: Radial and angular descriptors.

Unfortunately is not rotationally invariant. To deal with this problem intermediate functions or descriptors depending on possessing rotational invariance are introduced:

Radial descriptor

This is the simplest descriptor which relies on the radial distribution function

where denotes the unit vector the vector between atoms and [see Fig. 2 (a)]. The Radial descriptor can also be regarded as a two-body descriptor.

Angular descriptor

In most cases the radial descriptor is not enough to distinguish different probability densities , since two different can yield the same . To improve on this angular information between two radial descriptors is also incorporated within an angular descriptor

where denotes the angle between two vectors and [see Fig. 2 (b)]. The function is also commonly referred to as angular distribution function and it is equivalent to the power spectrum used in the Gaussian Approximation Potential[4] (GAP) method.

Basis set expansion

The atomic probability density can be also expanded in terms of basis functions

where , and denote expansion coefficients, radial basis functions and spherical harmonics, respectively. The indices , and denote main, angular and magnetic quantum numbers, respectively.

By using the above equation the radial descriptor and angular descriptor (power spectrum) can be written as


where represent Legendre polynomials of order .

In many cases is multiplied with an angular filtering function[5] , which can noticably reduce the necessary basis set size without losing accuracy in the calculations

where is a paramater controling the extent of the filtering. A larger value for the parameter should provide more filtering.

Potential energy fitting

It is convenient to express the local potential energy of atom in structure in terms of linear coefficients and a kernel as follows

where is the basis set size. The kernel measures the similarity between a local configuration from the training set and basis set . Using the radial and angular descriptors it is written as

Here the vectors and contain all coefficients and , respectively. The notation indicates that it is a normalized vector of . The parameters and control the weighting of the radial and angular terms, respectively. The parameter controls the sharpness of the kernel and the order of the many-body interactions.

Matrix vector form of linear equations

Similarly to the energy the forces and the stress tensor are also described as linear functions of the coefficients . All three are fitted simultaneously which leads to following matrix-vector form

where is a super vector consisting of the sub vectors . Here each contains the first principle energies per atom, forces and stress tensors for each structure . denotes the total number of structures. The size of is .

The matrix is also called as design matrix[6]. The rows of this matrix are blocked for each structure , where the first line of each block consists of the kernel used to calculate the energy. The subsequent lines consist of the derivatives of the kernel with respect to the atomic coordinates used to calculate the forces. The final 6 lines within each structure consist of the derivatives of the kernel with respect to the unit cell coordinates used to calculate the stress tensor components. The overall size of is looking like as follows

Error estimation

We use two different estimators for the errors in the force field:

  • Bayesian error estimation.
  • Spilling factor[7].

Bayesian error estimation

Ultimately for error prediction we want to get the maximized probability of observing a new structure on basis of the training set , which is denoted as . For this we need to get from the error of the linear fitting coefficients in the reproduction of the training data to which is explained in the following.

First we obtain from the Bayesian theorem


where we assume multivariate Gaussian distributions for the likelihood function

and the (conjugate) prior

The parameters and need to be optimized to balance the accuracy and robustness of the force field (see below).The ormalization is obtained by

Using the equations from above and the completing square method[6] is obtained as follows

Since the prior and the likelood function are described by multivariate Gaussian distributions the posterior describes a multivariate Gaussian written as

where we use the following definitions for the center of the Guassian distribution and the covariance matrix

By using the relation

and the completing square method[6] the distribution of is written as

Here is similar to but only for the new structure .

The mean vector contains the results of the predictions on the dimensionless energy per atom, forces and stress tensor. The diagonal elements of , which correspond to the variances of the predicted results, are used as the uncertainty in the prediction.

Finally to get the best results and to prevent overfitting the parameters and have to be optimized. To achieve this, we use the evidence approximation[8][9][10] (also called as empirical bayes, 2 maximum likelihood or generalized maximum likelihood), which maximizes the evidence function (also called model evidence) defined as

The function corresponds to the probability that the regression model with parameters and provides the reference data . Hence the best fit is optimized by maximizing this probability. The maximization is carried out by simultaneously solving the following equations

where are the eigenvalues of the matrix .

Spilling factor

The spilling factor is a measure of the density of a local reference configuration near the new local configuration given as

It should be noted that the equation is slightly modified from its orginial equation given by Miwa and Ohno[7] to make it applicable to a non-normalized similarity measure such as, e.g. the radial descriptor, too.