Number of bands NBANDS: Difference between revisions

From VASP Wiki
(Created page with "One should chose NBANDS so that a considerable number of empty bands is included in the calculation. As a minimum we require one empty band. VASP will give a warning, if this...")
 
No edit summary
Line 1: Line 1:
One should chose NBANDS so that a considerable number of empty bands is included in the calculation. As a minimum we require one empty band. VASP will give a warning, if this is not the case.
NBANDS must be chosen in such that a considerable number of empty bands is included in the calculation. As a minimum, VASP  requires one empty band, otherwise VASP will give a warning. Only for large gap insulators, accurate results can be obtained without empty bands and the warning might be ignored.


{{TAG|NBANDS}} is also important from a technical point of view: In iterative matrix-diagonalization schemes eigenvectors close to the top of the calculated number of vectors converge much slower than the lowest eigenvectors. This might result in a significant performance loss if not enough empty bands are included in the calculation. Therefore we recommend to set {{TAG|NBANDS}} to ''NELECT/2 + NIONS/2'', this is also the default setting of the ''makeparam'' utility and of VASP.4.X. This setting is safe in most cases. In some cases, it is also possible to decrease the number of additional bands to ''NIONS/4'' for large systems without performance loss, but on the other hand transition metals do require a much larger number of empty bands (up to ''2*NIONS'').
Choosing {{TAG|NBANDS}} large enough is important for the following reason. In iterative matrix-diagonalization schemes, eigenvectors close to the top of the calculated number of states converge much slower than the lowest eigen states. This might result in a significant performance loss, if not sufficiently many empty bands are included in the calculation. Therefore, we recommend to set {{TAG|NBANDS}} to ''NELECT/2 + NIONS/2''. This is also the default setting, which is safe in most cases. In some cases, it is also possible to decrease the number of additional bands to around ''NIONS/4'' slightly improving the performance. On the other hand, some transition metals and atoms with open f shells might  require a much larger number of empty bands (up to ''2*NIONS'').


To check this parameter perform several calculations for a fixed potential ({{TAG|ICHARG}}=12) with an increasing number of bands (e.g. starting from ''NELECT/2 + NIONS/2''). An accuracy of <math> 10^{-6}</math> should be obtained in 10-15 iterations. Mind that the {{TAG|RMM-DIIS}} scheme ({{TAG|IALGO}}=48) is more sensible to the number of bands than the default CG algorithm ({{TAG|IALGO}}=8).  
To check this parameter perform several calculations for a fixed potential ({{TAG|ICHARG}}=12) with an increasing number of bands (e.g. starting from ''NELECT/2 + NIONS/2''). An accuracy of <math> 10^{-6}</math> should be obtained in 10-15 iterations. Mind that the {{TAG|RMM-DIIS}} scheme ({{TAG|ALGO}}=Fast) is more sensitive to the number of bands than the default Davidson algorithm ({{TAG|ALGO}}=Normal).  


----
----
[[Category:Calculational issues]]
[[Category:Calculational issues]]

Revision as of 11:17, 14 October 2020

NBANDS must be chosen in such that a considerable number of empty bands is included in the calculation. As a minimum, VASP requires one empty band, otherwise VASP will give a warning. Only for large gap insulators, accurate results can be obtained without empty bands and the warning might be ignored.

Choosing NBANDS large enough is important for the following reason. In iterative matrix-diagonalization schemes, eigenvectors close to the top of the calculated number of states converge much slower than the lowest eigen states. This might result in a significant performance loss, if not sufficiently many empty bands are included in the calculation. Therefore, we recommend to set NBANDS to NELECT/2 + NIONS/2. This is also the default setting, which is safe in most cases. In some cases, it is also possible to decrease the number of additional bands to around NIONS/4 slightly improving the performance. On the other hand, some transition metals and atoms with open f shells might require a much larger number of empty bands (up to 2*NIONS).

To check this parameter perform several calculations for a fixed potential (ICHARG=12) with an increasing number of bands (e.g. starting from NELECT/2 + NIONS/2). An accuracy of should be obtained in 10-15 iterations. Mind that the RMM-DIIS scheme (ALGO=Fast) is more sensitive to the number of bands than the default Davidson algorithm (ALGO=Normal).