IBSE

IBSE = 0 | 1 | 2 | 3
Default: IBSE = 2 

Description: IBSE can be used to select the algorithm for solving the Bethe-Salpeter or Casida equation.

---

The following options are available to solve the Bethe-Salpeter or Casida equation:

• IBSE = 0: Exact diagonalization with old BSE driver
• IBSE = 1: Time evolution
• IBSE = 2: Exact diagonalization
• IBSE = 3: Lanczos algorithm

IBSE = 2 and IBSE = 0 yield exactly the same results but the old driver (IBSE = 0) is typically much slower and will be deprecated in the future.

Mind: IBSE = 2 and IBSE = 3 are only available for VASP version 6.5.0 and above.

Scientifically significant output

Not all solvers provide all types of scientifically relevant output. The table below summarises for each value of IBSE what kinds of results can be obtained.

Output type	Output file(s)	IBSE
		0	1	2	3
Dielectric function	vasprun.xml, vaspout.h5	Yes	Yes	Yes	Yes
Optical transitions	vasprun.xml, vaspout.h5	Yes	No	Yes	Yes
BSE fatbands1	BSEFATBAND, vaspout.h5	Yes	No	Yes	No
Exciton wavefunction1,2	CHG.X (X = excitonic state index), vaspout.h5	Yes	No	Yes	No
1 Only written if NBSEEIG is set in the INCAR 2 Only written if BSEHOLE or BSEELECTRON is set in the INCAR

Performance output

Besides the numerical results, different solvers will write different information on the OUTCAR. In the following examples we used a small bulk-LiF unit cell on a sparse k-grid.

IBSE = 0

The old BSE driver performs the exact diagonalization of the BSE Hamiltonian. As such, at the end it only provides information on how long it took to diagonalize the matrix and how long it needed to compute the optical amplitudes.

   BSESUM:  cpu time      0.0000: real time      0.0000
  BSEDIAG:  cpu time      2.2567: real time      2.4521
   SELFEN:  cpu time      0.0002: real time      0.0002
  BSEOSZI:  cpu time      5.9516: real time      6.5337

IBSE = 1

At the end of the run the time-evolution solver will write to the OUTCAR the relevant parameters used in its execution, as well as how long it took to perform the full computation.

Time evolution parameters used:
-------------------------------

Calculating BSE spectra using full res.-antires. coupling
Matrix rank:       2430

 Omega_max:   94.2354
Broadening:    0.4000
     T_max:   25.0000
   BSEPREC:  Accurate
    Scheme:  3rd order update equations

Number of time steps:     9423

First time step:  0.265293E-02 1/eV
Last  time step:  0.265293E-02 1/eV

dOmega  :  0.01000
N_Omega :   9425

CPU time (time steps)        55.76sec

   BSE_TE:  cpu time     60.0951: real time     65.1642

IBSE = 2

Similarly to the old exact diagonalization solver, the new driver also only provides timings on how long it took to diagonalize the full matrix and to compute the optical amplitudes.

  BSEDIAG:  cpu time      2.2534: real time      2.6143
  BSEOSZI:  cpu time      1.2601: real time      1.3230

IBSE = 3

The Haydock-Lanczos solver terminates the calculation once the trace of the dielectric function converges. At the end, information about convergence of the dielectric function along each direction is written to the OUTCAR file.

Parameters set for Lanczos algorithm
  Threshold:  0.1000000E-04
  Maximum energy:   94.235
   Number of energy steps:         1000
   Number of iterations needed to reach set accuracy:         250
   Final accuracy along all directions:
   x          0.6277122E-05
   y          0.4480512E-05
   z          0.1392376E-04
   xy         0.1792577E-04
   yz         0.4541156E-05
   zx         0.1034294E-04 

Related tag and articles

IBSE, BSEPREC, NBANDSV, NBANDSO, CSHIFT, OMEGAMAX, BSE calculations, Time-dependent density-functional theory calculations, Bethe-Salpeter equations

---